Description
This program develops the knowledge and skills you need to install and repair piping systems in residential and commercial buildings.
You will learn to install and repair water and waste disposal systems and plumbing fixtures, and to lay out sanitary drainage, venting, and storm drainage systems. Interpretation of the plumbing code, rigging and material handling, and piping-related mathematics, communications, and sciences will also be studied.
You will develop skills in the following:
Emphasis will be on the efficient and safe use of tools and materials in accordance with piping, safety, and building codes and regulations.
Prior to starting the program, you will be invited to attend a program overview information session. You will also be invited to participate in a math and reading skills diagnostic testing session that will advise you of your program readiness.
This is a not an apprenticeship program, but may provide credit transfer opportunities towards apprenticeship. The Government of Manitoba, Entrepreneurship, Training and Trade offers apprenticeship training that combines on-the-job practical skills development with levels of technical training. If you are interested in applying to an apprenticeship program, please visit www.manitoba.ca/tradecareers
DOCUMENT SUBMISSION
Upload Through Your Future Student Account
If you do not have a Future Student Account or require assistance, please contact our Student Service Centre at 204-632-2327.
Internationally Educated Applicants - visit www.rrc.ca/credentials for credential assessment information.
However, if you apply within 6 weeks of the program start date, admission requirements are due within 5 days of applying.
Regular Admission Requirements
Mature Student Admission Requirements
If you are 19 years of age or older and have been out of high school for a minimum of one year at time of application, and you do not meet the regular admission requirements, you may apply under the Mature Student admission requirements.
English Language Assessment | Minimum Required Levels | |||
---|---|---|---|---|
L - Listening, S - Speaking, R - Reading, W - Writing | L | S | R | W |
AEPUCE
(Academic English Program of University and College Entrance )
Requirement: Submission of a parchment (certificate) indicating successful completion of the AEPUCE program, including language levels achieved if available. | 8 | 8 | 8 | 6 |
CAEL and CAEL Online (Canadian Academic English Language) | 60 | 60 | 60 | 50 |
CLB (LINC)
(Canadian Language Benchmark - Language Instruction for Newcomers to Canada)
Canadian Citizens: LINC programs are not available. | 8 | 8 | 8 | 6 |
Duolingo
(Duolingo English Test)
* MINIMUM OVERAL SCORE OF 115 REQUIRED. There are no minimum required levels for L,S,R,W. Only Duolingo English Test scores that have been verified through the Duolingo English Test Portal will be accepted. | 0* | 0* | 0* | 0* |
IELTS - Academic
(International English Language Testing System)
Please Note: 3 year expiry date for Nursing Program Applicants | 6.5 | 6.5 | 6.5 | 5.5 |
PTE - Academic Online Assessment (Pearson Test of English) | 58 | 58 | 58 | 42 |
Password Skills
(An in person English Language Assessment hosted by RRC Polytech)
This in-person, computer-based test is composed of four test modules: reading, writing, listening and speaking. The test takes 3 hours and 5 minutes to complete and is conducted in two parts. The first part assesses reading, listening, and writing, and the second part assesses speaking in a separate room.
Password Skills is hosted by the RRC Polytech Testing and Assessment Centre: E440, Manitou a bi Bii Daziigae building, on the fourth floor.
If you wish to do Password Skills remotely (not in-person), Password Skills Plus can be taken online. RRC Polytech does not offer Password Skills Plus, but we do accept the results for entry into program.
| 6.5 | 6.5 | 6.5 | 5.5 |
Password Skills Plus (Password Skills Plus is an online assessment that can be taken instead of Password Skills. ) | 6.5 | 6.5 | 6.5 | 5.5 |
TOEFL-iBT
(Test of English as a Foreign Language - internet Based Test)
To meet the needs of students who are unable to take the TOEFL iBT® test at a test center due to public health concerns, ETS is temporarily offering the TOEFL iBT Special Home Edition test in selected areas. | 20 | 20 | 19 | 18 |
Reference books are essential components of the work procedures for this program, so you will require above-average reading vocabulary and comprehension.
You should have a mechanical aptitude and an interest in mathematics and science. You need to be in good physical condition because of the need to lift and move heavy equipment. You will need a tolerance for working conditions that include inclement weather, noise, fumes, and odors.
If you are seriously considering a career in the piping trades, you should be prepared to work both indoors and outdoors, often in trenches and on scaffolds, and to work overtime when required to meet emergencies or construction schedules on the job. Many job opportunities exist in rural areas, so you may need to relocate to secure work.
You should also be prepared for occasional late shifts at the College during your training, as courses in the program may run until 6:00 p.m. from time to time.
Location | Start Date | Apply Link |
---|---|---|
Notre Dame Campus | Aug 25, 2025 | Apply Now |
Students may apply for financial assistance through the Manitoba Student Aid program. For general information on applying please call 204-945-6321 or 1-800-204-1685, or visit their website at www.manitobastudentaid.ca, which also includes an online application. For detailed information, please visit one of the RRC Polytech Student Service Centres or call 204-632-2327. Applicants requiring financial assistance should complete their student loan applications well in advance of the class start date.
(No description available at this time)
In this course, you will learn mathematics as they apply to the trade. Topics covered include fractions, decimals, measurement, percent, square root, area (rectilinear, circular, and sphere), volume (rectilinear and cylinder), pressure in liquids/gases, ratio and proportion, and parallel, jumper, and rolling offset calculations (45º, 60º, and 22.5º).
This course allows you to transfer theoretical knowledge underpinning piping, materials, and equipment to practical projects. Projects will give you practice in handling, measuring, cutting, and assembling common types of pipe according to code regulations. In addition, you will practice reaming and threading steel pipe using hand dies, cutters, reamers, and power threading machines. Joining copper pipe and fittings using hard and soft solders will also be done along with making flared and compression joints according to code regulations. Other procedures you will learn include how to groove steel and copper pipe for victaulic fittings and assemble victaulic and flanged materials. You will be shown specialty pipe such as sewage disposal and special waste pipe. Finally, you will practice using drain cleaning equipment.
This course gives you practice in the interpretation of simple drawings and blueprints. As well, it trains you to produce 'on-the-job' sketches intended as a means of communication within the trade.
This course introduces you to staff members and informs you about relevant College policies and procedures, program curriculum, and future employers’ expectations in terms of punctuality, honesty, working habits, and compatibility with fellow employees. As well, you will get an overview of the following: tools of the trade along with the general purpose and care and maintenance of each tool, materials used in the trade along with the general uses and handling and storage of each type of material, safety precautions observed when working with tools and materials, and shop duties and clean-up rules.
This course introduces you to common piping materials and their correct uses, methods of assembling, supporting, handling, and storing, and the types of tools used with each. Students will also learn how each type of piping is to be joined, supported, and tested. Types of piping includes, but is not limited to, cast iron, black iron, galvanized iron, copper, lead, plastic, and glass.
Interpretation of plumbing code, sizing of sewers, drains, stacks, vents, etc., drawing layouts, and constructing actual installations from layouts and blueprints.
This course is designed to give students practice in applying theoretical knowledge of installation through different roughing-in project installations, simple fixture installations, and assembling and testing drainage and vent piping in installations. Students also perform limited project layouts from blueprints, isometric and diagrammatic drawings.
This course will introduce the students to construction safety. The block will cover trenching, scaffolding, ladders, house-keeping, knots, basic rigging, crane signals, proper use of tools and equipment, and personal safety equipment (eye wear, hearing protection, footwear, clothing, hard hats, etc.).
This course is designed to provide students with the underpinning theory of properties of water, metals and alloys; hydrodynamics, hydrostatics and pneumatics; and simple machines that are common in the plumbing trade. Students learn to relate topics such as states of matter, heat and temperature, sensible and latent heat, temperature conversion, specific heat, relative density, pH, hardness, M.A. efficiency, current, circuits, corrosion, conductivity, expansion, physical and mechanical properties of metals and alloys, hydraulics and pneumatic concepts to the plumbing field.
This General Safety Training (GST) teaches basic general safety content to arm students with the core information necessary for them to protect themselves in workplaces on all descriptions. Although some examples may consider Manitoba legislation, this course has been developed by occupational safety and health professionals using generic information that is not provincially specific.
(No description available at this time)
The student is taught the basics of oxyacetylene welding by means of lectures in the classroom and practical demonstrations in the welding shop. He/she then works with the torch to acquire the ability to handle the outfit in the proper manner. A theory and practical test is given for evaluation purposes. One week oxyacetylene cutting and welding, brazing and silver brazing in flat position.
Online learning is a critical component of course delivery in all Red River College Polytechnic programs. To ensure each student has the tools they need to achieve their academic goals, all Red River College Polytechnic students require, at minimum:
1. Off-campus access to a current computer with a webcam
2. A high speed internet connection
• Recommended minimum speed: 10 mbps for download, 3 mbps for upload
• Slower internet connection speeds may result in audio and video issues. Please keep in mind that if others in your home are using the same internet connection at the same time as you are, you may also experience audio and video issues.
• Please refer to https://www.rrc.ca/future-students/computer-requirements/ for further information on Computer Requirements for Students.
Please note that any anticipated costs are not included in Books and Supplies estimates.
You may decide to take an apprenticeship program in one of the piping trades: plumbing, steamfitting, or sprinkler and fire-protection installation.
You will be required by Apprenticeship Manitoba to return to the College for additional theoretical and practical training. You will also be required to pass an inter-provincial examination to obtain your journeyperson's certificate.
For more information about the apprenticeship program, contact:
Apprenticeship Manitoba
Manitoba Entrepreneurship, Training and Trade
100-111 Lombard Ave
Winnipeg, MB R3B 0T4
Phone 204-945-3337
Fax 204-948-2346
Toll-Free: 1-877-978-7233 (1-877-97-TRADE)
Email: apprenticeship@gov.mb.ca
www.gov.mb.ca/ctt/
Recognition of Prior Learning (RPL) is a process which documents and compares an individual's prior learning gained from prior education, work and life experiences and personal study to the learning outcomes in College courses/programs. For more information, please visit www.rrc.ca/rpl.
Graduates may find employment with plumbing contractors or in industrial plants as maintenance people.
Job opportunities at the journeyperson level include roles as plumbers, steamfitters, or sprinkler and fire-protection installers. After gaining work experience, graduates may move into positions as supervisors, estimators, plumbing contractors, and building inspectors.