ELEEF-DP Electronic Engineering Technology

Courses and Descriptions

Courses and Descriptions

(Click the course name to view the description of the course)
Recognition of Prior Learning (RPL)
In addition to Transfer of Credit from a recognized post secondary institution, other RPL processes are available for RPL courses. Click here for more information. For courses with no RPL, please check www.rrc.ca/rpl for additional contact information.
BMED-1001Biomedical Applications
More Information

This course is designed to provide students with an overview of the field of Biomedical Applications. Keeping math, physics, and chemistry to a minimum, students will be briefly introduced to cell biology, anatomy, and physiology. We will then focus on biomaterials, bioinstrumentation, Biomedical sensors, biosignals processing, X-ray imaging, CT-scan, nuclear medicine, ultrasound, magnetic resonance, and lasers.

Prerequisites:
CIRC-2022Circuits & Fields
More Information

This is a course in communications principles and a continuation of CIRC-2091. Topics include transmission lines, waveguides, antennas, radio wave propagation, and like analysis.

Prerequisites:
CIRC-2091Communication Circuits
More Information

This course is designed to help students understand and analyze fundamental concepts and circuits in a communications system.

Prerequisites:
COMM-2010Technical Communications 2
More Information

This two hour workshop builds on the learning from COMM-1043. The focus is on developing core communication skills that enable the written documenting and informal oral presenting of technical information. A PASS is required to progress to COMM-3049.

Prerequisites:
COMM-3005Technical Thesis
More Information

This course is a review of report writing, oral presentations, and job search techniques. It introduces planning, writing, and presenting a formal report and participating in meetings. Students will produce written reports on projects required in co-requisite courses and present oral briefings common in industry.

Prerequisites:
COMM-3049Technical Communications 3
More Information

This two hour workshop builds on the learning from COM-1043 and COMM-2010 by applying core communication skills to job search documents and techniques. A PASS is required to progress to COMM-3005.

Prerequisites:
CTRL-1000Control Systems
More Information

This course introduces students to modelling, analysis, and design of dynamic systems. Block diagrams and input/output representations are used. Analytical and numerical techniques are used to simulate dynamic systems and obtain system response. Models for electrical and electromechanical systems are developed in terms of linear time-invariant differential equations which can be solved to obtain the system response in the time domain. Laplace transform is used to obtain response of dynamic systems. The corresponding transfer function representation and Bode plots are used to provide graphical representation of the frequency response of the system and investigate stability. Feedback control is presented in terms of speed and position control of a DC motor, and proportional- integral-derivative (PID) controller design.

Prerequisites:
DCOM-1000Digital Communications
More Information

This course will provide students with an in depth knowledge of communications concepts. The focus will be on serial communications. Serial communications is introduced using the RS232 standard as a learning tool. Students will learn about link characteristics, flow control, protocol design, LANs and WANs, telephone communication, fiber optic link characteristics, and design and modulation methods. Co-requisite: MICR-1240 Embedded Systems.

Prerequisites:
DCOM-2001Routing & Switching
More Information

This course is a study of routing and switching for Local Area Networks (LANs) and Wide Area Networks (WANs). Students will learn how to configure a Cisco router, troubleshoot networks, and implement basic security. Students will also learn how to configure a Cisco switch, implement virtual local area networks (VLANs), and IEEE 802.1q trunking. The course concludes with an investigation of wide area network (WAN) protocols.

Prerequisites:
DCOM-3002Wireless Applications
More Information

This introductory course to Wireless LANs focuses on the theory, design, planning, implementation, operation, and troubleshooting of Wireless LANs. It includes a comprehensive overview of technologies, security, and design best practices with particular emphasis on hands-on skills in the following areas: wireless LAN setup and troubleshooting, 802.11 (a, b, and g) technologies, WLAN applications, site surveys and link design, WLAN products, WLAN security, and emerging wireless technologies.

Prerequisites:
DCOM-3005Digital Mobile Cellular Tech
More Information

(No description available at this time)

Prerequisites:
DEVC-2005Analog Devices and Applications
More Information

This course starts the discussion of frequency response of transistors. Special emphasis is then placed on feedback theory, linear and non-linear applications of operational amplifiers, and specific analog devices in electronic applications such as active filters, function generators, timers, and regulated power supplies (both linear and switched)

Prerequisites:
DEVC-2149Industrial Electronics
More Information

This course provides students with the knowledge and skills applicable to electronic devices, circuits, and systems used in industrial settings. Students will have a clear understanding of general industrial electronics techniques and the ability to both analyze and tackle practical industrial electronics problems. Students will learn the principles of operation, characteristics and applications of optoelectronic devices, transducers and sensors, triggering devices, power control semiconductors, and two-terminal devices used for protection and other applications. They will design, measure, and troubleshoot applications using triggering circuits, alarm and protection circuits, as well as light, speed, and temperature controllers.

Prerequisites:
DIGI-2002Digital Signal Processing
More Information

Students will gain familiarity with digital signal processing operations that include sampling, digital filtering, signal synthesis, spectral analysis, and mathematical tools such as the Discrete Fourier Transform, Fast Fourier Transform, and z-Transforms. Frequency response and stability of digital signal processing systems will also be examined, as well as the basics of Finite Impulse Response (FIR) and Infinite Impulse Response (IIR) filters.

Prerequisites:
DIGI-2224Digital Systems
More Information

This course continues the applications of digital logic first studied in DIGI-1030 Digital Logic, using VHSIC Hardware Description Language (VHDL) and the Altera Quartus II Programmable Logic Development Environment. The course initially covers the fundamental syntax of VHDL as applied to combinational logic (gates) and sequential logic (latches and flip-flops). This is then followed by a series of applications using VHDL, such as counters, shift registers, design of a Universal Asynchronous Receiver/Transmitter (UART), and state machines. Techniques of digital-to-analog conversion are also studied.

Prerequisites:
DIGI-3002Advanced Digital Signal Processing
More Information

This course is a continuation of DIGI-2001 Digital Signal Processing. It begins with an examination of sophisticated computational techniques, such as the Fast Fourier Transform (FFT) and windowing. Later, students will work with a Texas Instruments Digital Signal Processing Kit (DSK) to learn how to develop their own programs in polling and interrupt-driven forms. Students will work on DSP projects with applications that include audio effects and communication systems.

Prerequisites:
EMBD-2000Embedded Systems 1
More Information

Each unit of this course consists of a project. Each project involves microcontroller interfacing and C language programming. The projects will build on one another, resulting in a functional, stand-alone embedded controller. Along the way the student uses internal and external peripherals to accomplish each unit’s goal. Topics include: interfacing to a matrix keypad and an LCD module, hardware interrupts and serial packet communication. Students will maintain a portfolio of their lab assignments for hand in at the end of the course.

Prerequisites:
EMBD-3000Embedded Systems 2
More Information

This course is designed to enhance the knowledge and skills necessary to use a microcomputer for real-world industrial applications. Starting with the software and hardware applications from Embedded Systems 1 as a user interface, Embedded Systems 2 adds the use of peripherals such as digital-to-analog and analog-to-digital converters, sensors, and actuators. Students interface electronic signals to the peripherals while issuing interrupt control in their programs. Peripheral control using Application Programming Interface (API) functions, TCP/IP implementation, and Windows programming are also introduced.

Prerequisites:
ETHC-1002Professional Ethics
More Information

This course prepares students for being engineering technology professionals by exploring critical thinking, ethical behavior, and the legal and professional accountabilities that apply in the workplace. The industry's code(s) of ethics and practical case studies are used as the learning focus.

MANU-2009Printed Circuit Board Manufacturing and Layout
More Information

(No description available at this time)

Prerequisites:
MATH-3007Advanced Calculus
More Information

A course in applied mathematics is key to understanding and analyzing core material in Electrical Engineering. Topics in particular include Fourier series and its application to analyzing signal spectra and the use of Laplace transforms in solving for the response of electric circuits.

Prerequisites:
MEAS-2121Electronic Measurements
More Information

This course provides practical application of instruments, interpretation of results, analysis methods, and documentation of data from different instruments. Topics include impedance matching and frequency response. The proper use of instruments for measuring signal power levels for a wide range of frequencies is emphasized.

Prerequisites:
PROJ-2000Project Management
More Information

This course develops a basic understanding of the generally accepted knowledge areas and practices of project management including terminology. Students learn how to apply basic processes, tools, and techniques. They develop a basic project plan in a team environment. This course combines theoretical knowledge with practical laboratory skills using project management software that can be applied immediately on the job.

PROJ-2002Engineering Technology Report
More Information

Students will research and critically analyze an industry-related problem to synthesize possible solutions for the chosen problem. Students will write a technical report to document their process and make recommendations for addressing the problem analyzed. The report will also demonstrate students' ability to communicate effectively and concisely, and to format the delivery of information in a manner consistent with industry practices.

PROJ-3000Final Project
More Information

This course enables students to put into practice the knowledge and expertise acquired during previous semesters. Students apply previous knowledge to the area of their interest, and are taught the following group related activities: safety, feasibility study, specification, quotation, design, planning, documentation, group dynamics, problem analysis, selection of components to the design, testing concepts, and acceptance testing. Co-requisite: COMM-3005 Technical Thesis.

STAT-1001Statistics and Quality Assurance
More Information

This course is designed to educate electronic engineering technology students to make quick, and probably right, decisions in their personal lives and in their professions, where timely obtained information and the implementation of the information are crucial. This course deals with the introduction to basic statistical concepts and techniques, and their applications in technical work. The main topics covered in this course are the presentation and analysis of data, continuous and discrete probability distributions, estimations of means and proportions, linear regression and correlation and quality control. These topics are well coordinated with relevant industrial applications through assigned problems and handouts. This course introduces the student to the concept of quality programs in the workplace. They will learn what quality is and why it is important to business.

Prerequisites:
WRKE-2007Co-Op Work Experience
More Information

(No description available at this time)

Page produced on 2019-11-19 03:56:44
Red River College endeavours to provide the most current version of all program and course information on this website. Please be advised that classes may be scheduled between 8:00 a.m. and 10:00 p.m. The College reserves the right to modify or cancel any course, program, process, or procedure without notice or prejudice. Fees may change without notice.